Remote Central reserves the right to remove or modify any post that is deemed inappropriate. The following page was printed from RemoteCentral. Register Forum Search Login. Onkyo Remote - How To Program? This thread has 1 response. Displaying all posts. Post 1 made on Tuesday September 26, at Terry Historic Forum Post. OP Post 2 made on Wednesday September 27, at Only TV remote control codes can be entered for TV.
Program a remote control code in accordance with the input since each button also works as the input selector. Look up the Remote Control Codes for the corresponding remote control code.
The codes in the Remote Control Code List are those known as of the date of publication and may be changed. The remote indicator lights in the input mode. With the number buttons, enter the 5-digit remote control code within 30 seconds.
Programming is complete when the remote indicator flashes twice. The remote indicator flashes once slowly when programming the remote control code fails. It is possible to operate an MHL-enabled mobile device with the unit's remote controller by registering the code of the MHL-enabled mobile device below to the unit's remote controller. Operation may be unstable or incorrect depending on the mobile device used. Look up the Remote Control Code List for the corresponding remote control code.
The codes in the Remote Control Code List are those known as of the date of publication and may be changed. With the number buttons, enter the 5-digit remote control code within 30 seconds. The registration is complete when the remote indicator flashes twice. The remote indicator flashes once slowly when registering the remote control code fails. Try the registration again. However, you will not be able to remap the colored buttons if Zone 2 is selected. Within 30 seconds, press the colored buttons from left to right, in the order you want to remap.
0コメント