If you are experiencing interference on the channels you are using, follow these instructions to change the channel that uses. After you select Yes, the receiver begins taking a software upgrade.
You will see a Warning that Vital program information will now be. You will also see a status bar showing the downloaded into your receiver progress of this upgrade. Page 50 TV connections as described on page Otherwise, obtain a 10 dB attenuator you can buy one from an electronics parts store.
Perform the following with an existing remote control: screen by pressing MENU on the a. Page 54 TV1 outputs. While using this feature, both the green 1 and blue 2 remotes for your satellite receiver can control what is displayed on all TVs connected to the system. The following Page 55 : If you do not want to display programming on any other TV besides Note TV1 and you do not want Remote Control 2 to control the receiver, select.
The following screen is displayed on remote TVs when Disable View Page Using The Remote Controls The following section describes how to use the remote controls with your Control 1 is used to satellite receiver. The remote control must be in SAT mode for the buttons to control TV1 menus control the satellite receiver.
Press it again to switch between the last two satellite receiver channels you were watching. Page When you press the RECOVER button as described below, the remote control sends commands to your TV to change channels or video inputs to try to get you back to watching satellite programming.
Use the menus to control the receiver and to use its features, such as setting locks, choosing a program, or creating a favorites list. Open and Close Menus Themes and Search Page Page 64 Favorites List of Choices in the Menus When you make a choice in a list, the receiver does not apply the change until you select the option. If you do not want to save any changes, select Save option to discard all the changes made in the menu. If you select another choice, your previous choice is deselected.
If the list is active, the displays only the All Sub Program Guide channels in your subscription. Press the INFO button to find out. Page Displaying Program Information Browse Banner programs are available without changing the program that you are watching. The receiver displays information on the program you are watching at the top information at the bottom of the TV screen.
Browse Banner You cannot make Select the that you want to create or change. Favorites List : You cannot modify the lists. Page 72 : This works only if you have added channels to the.
Extend End Time Page Press the MENU button. Select the option. Timers 3. Select the Create option. The receiver displays the Create a Manual Event menu. Select a option. Page 76 If you try to create event timers for overlapping programs, the receiver displays a screen with the dates and times of both programs. The receiver also displays this screen if a program time has changed, causing one timer to overlap another.
Page 77 You can create a limited number of event timers. If you try to create more, the receiver displays a menu giving you the option to delete an existing timer.
If you do not delete an existing timer, you will not be able to create any new ones. Page 78 You can create a manual event timer for a locked program without entering the password. However, if you do this, when the event timer operates the receiver may display only an error or password entry menu. Page 80 8. Select a program that you recorded earlier one that is not recording now , then select Start Over 9. This feature is available in only. Page 82 —The receiver stops recording at the end Record the Entire Event of the event.
This selection is available only if the receiver was tuned to the channel at the beginning of the program. Use the Page 83 8. Select a program that you recorded earlier one that is not recording now , then select Start Start Over 9. Page 84 5. Select a program that you recorded earlier one that is not recording now , then select Start Over 6. You should now be watching a pre-recorded program while the receiver is recording the other events programs.
Page 85 Create Timer Remote Control 2 is used to control 5. The displays which satellite receiver output is scheduled to Program Guide TV2 menus on the record the event. When is enabled, the satellite receiver Record Plus remote TV s.
Page 87 Using the DVR Features On some TVs, the presence of fixed images for extended periods of time may cause them to be permanently imprinted on the screen. Page 90 Chapter 3 Using the System On some TVs, the presence of fixed images for extended periods of time may cause them to be permanently imprinted on the screen.
Page 91 The receiver needs more room to record programs with more action. So, the total recording time is not exact. This menu allows you to search for programming by themes movies, sports, etc. Page 94 Chapter 3 Using the System Search 1. Page Search History Search screen. Results : If you select a program that is on now, the receiver tunes to that Note program. If you select a program that is on in the future, you will have to set a timer.
See page 67 for more information on using event timers. Page Using Locks Locks displays a message prompting you to enter the password. If you fail to enter the correct password, the receiver does not allow more tries for several minutes.
Page 97 To lock Locks the receiver, you must first create a password. If you forget your password, you will need to speak with a Customer Service Representative. Page 98 Using the System 4. When you enter the fourth digit of the password, the receiver highlights the option. The PG rating indicates, in the view of the Rating Board, that parents may consider some material unsuitable for their children, and parents should make that decision.
Page Chapter 3 Using the System admitted. The rating simply signals that the content is appropriate only for an adult audience. Page 7. Select the option to save the changes. Done 9. If the receiver is not locked, you must lock it to put the locks you just created into effect by selecting Lock System Creating or Changing Channel Locks You can lock any channel, including pay per view channels.
Done 8. If the receiver is not already locked, you must lock it to put the locks you just created into effect. Locking and Unlocking the Receiver Front Panel TV1 Only his keeps anyone from using the front panel buttons, but it does not lock the Tip: Remote remote control buttons. Page As soon as you enter the fourth digit of the password, the receiver highlights the option.
If the receiver is not locked, you must lock it to put the lock you just created into effect. Page 3. As soon as you enter the fourth digit of the password, the receiver highlights the option. Page 9. As soon as you enter the fourth digit of the password, the receiver option. Page Personal Identification Number To use this feature, make Caller ID sure you have an active telephone line connected to the receiver and that the feature is enabled on the line.
After you turn on on your If you want to reset the receiver to be the same as when it was shipped from the factory, do the following: 1. Page Changing Program Languages An alternate language applies only to the audio part of a program and does not change the language used in the menus displayed by the receiver. Page Updates Updates Updates Your satellite receiver is set to turn itself off at a. To change the update time, complete the Program Guide following: 1.
Press 8 to open Preferences 3. Tip: Remote You can set up both remote controls to control the satellite TV receiver and up Control 1 is used to three other devices each. Turn the device on. Turn the device back on and Sometimes the blank POWER try some other buttons to button works when other buttons make sure they work. Press it again to switch between the last two VCR-tuned channels you used. Press and hold the TV Mode button until all four Mode buttosn are lit. Enter 00 or The receiver displays a message asking you to wait until the call is done.
When the call is done, select the option to exit the test menu. Also, write down any error messages that the receiver displays on the television screen. Page If this does not work, do the Check Switch test.
Make sure that all required cables are signal. Make sure that all required cables are picking up the satellite signal. If not, select the No option. Locate the UHF antenna tip away from other electronics equipment or metal surfaces, even if separated by wooden shelving. TV or the sound system. This will allow the Banner, but find you extended, but not unlimited time Program Guide to be updated.
You but the timer does not changed so that the event timer operate at all. This means the receiver will ask you before it records over programs you program, it may record over that recorded that recorded program.
Every attempt has been made to include all codes. If your device brand is not listed or if the codes do not work, the remote may not control your device. In some cases, codes may operate some but not all buttons shown in this guide.
Page Chapter 4 Reference Codes Codes Codes , , , , Pioneer , , , , Signature , , , , , , , , Silver , , , Simpson Midland , , , , Portland , , , , , , , , Solavox Page Appendix EchoStar warrants any such replacement parts against defects in materials or workmanship for the remaining part of the original warranty period. Note: "Parts" means items included in this package, which may include the satellite dish assembly, receiver, LNBF, remote control, or dish mounting hardware.
It does not include other parts purchased separately. Have the date of purchase and either your customer account number, the receiver conditional access number, or the receiver model number ready.
Display the System Info screen to find these numbers. We may also limit or restrict the websites and information that you may access on the Internet using your receiver at any time without notice. Page B. Additional Tuners and Receivers.
We may choose to allow you to place additional receivers on your account. If we allow you to do so, each additional receiver will be authorized to receive the same Services as your initial receiver, subject to the limitations of your television equipment.
Page Equipment. If you have an external hard drive connected to the receiver, you have a 9 day Electronic Program Guide and Event Based Recording. For record timers, you select a specific program on a specific channel, and tell the receiver how often you want to record that program.
Page 58 Remote Control Timers When a Timer Starts For two minutes before a timer starts a recording, the receiver may display a digital countdown timer reminder on the TV screen. The receiver also displays this screen if a program time has changed, causing one timer to overlap another.
You must delete or edit one of the timers. Making the Remote Work with the Receiver These instructions configure your remote. Confirm that The receiver then To change the mode, press the button for the device you want the remote to operate. Release Mode button Press and hold the correct mode button for example, TV until all of the mode buttons light.
Page 67 Chapter 9 Operating Other Devices Using the insert of device names and codes that came with the remote control, find the brand name of the device. If the brand is not listed, see Programing using Device Codes Scan. Press and hold the Mode button until all the other mode buttons light up, and then release the button. This step programs the type of device that you want to program in AUX mode. Page 70 Receiver Customization Operating Other Devices On the DISH remote, press and hold the Mode button you want to use for the device until all the Mode buttons light up approximately three seconds , and then release it.
The selected Mode button flashes continuously. Page 72 Receiver Customization Operating Other Devices Controlling a Tuner or Amplifier Use the following remote control buttons to control a tuner, amplifier, or audio receiver. When you program the remote to operate the other receiver, the remote sends out IR signals to the receiver so the line of sight to the second dish antenna must be unobstructed.
When you press RECOVER as described below, the remote control sends commands to your TV to change channels or video inputs to get back to watching satellite programming. Page 77 Chapter 9 Notes Page 79 Connecting an external hard drive to your receiver allows you to record and archive programs.
All existing data on the device will be erased. Do you want to reformat the device? Visit www. A one- hour standard-definition program will transfer in only about five minutes! Copy protection Choose this option if you would like to see video in the upper right corner and four rows of channels per page. Select Done. Select the preferred language. Volume leveling keeps the volume levels consistent between programs and commercials, preventing drastic volume changes while watching television.
Enabling this feature is recommended, as it also helps improve the reliability of your receiver. To change the Highlight the number of hours of inactivity before the receiver waits before turning off. Page 89 Chapter 10 Notes Page 92 Repeat steps 4 and 5 until the TV displays video from the receiver. If you are unable to proceed through Step 2 of 5 in the Installation Wizard, relocate your Tailgater antenna to a location where there are no obstructions of the southern sky.
Page 96 ViP z receiver. Use the Point Dish screen to assist with pointing your manual mobile satellite antenna. If this is the first time you have opened the Local Channels screen, it will have no channels listed. Scan for channels by selecting Scan Locals. The scan will take a few minutes to complete. Page 99 TV for many years. New digital over-the-air TV signals are broadcast and received in the same way. However, digital over-the-air signal reception like analog over-the-air signal reception depends on several things.
DISH does not broadcast over-the-air signals and so cannot do anything to change over- the-air signal quality. However, the receiver's digital channel setup menus provide a signal strength bar that can help you in aiming the over-the-air TV antenna for the strongest possible signal. Resetting Your Receiver Acquiring satellite signal Press front panel message displays.
You may be asked to display these screens when you call DISH. Even though there are items that can be changed, only change them when specifically directed by a Customer Service Representative. Page Chapter 11 Notes Make sure your receiver is connected to broadband Internet.
Check whether branches or leaves have transmission of the satellite signal, grown into the line of sight. Page for outdoor cables. Check whether branches or leaves have no longer picking up the satellite grown into the line of sight.
Check whether branches or leaves have have temporarily lost the signal. Page Programming option from the side menu bar, or call the Customer channels have a red background. The Program Guide and Browse A Mon. A Daily event timer does the same, You set up an event timer for a Monday through Sunday.
Page Visit the mydish. You must be able to verify are unable to unlock the receiver. Every attempt has been made to include all codes. If your device brand is not listed or if the codes listed do not work, then the DISH remote Have the date of purchase and either your customer account number, the receiver conditional access number, or the receiver model number ready.
Display the Important System Page Residential Customer Agreement Agreement. If your Services are disconnected for non- payment or any other reason, DISH Network may require that you pay, and you agree to pay, before we reconnect your Services, all past due charges, a deposit equal to a minimum of one month of service charges, and all outstanding balances accrued through the date of such disconnection.
Smart Cards are not transferable. Such software is licensed, not sold, to you for use only under the terms and conditions of this license, and DISH Network, its licensors and its suppliers reserve all rights not expressly granted to you. Page Bureau of Investigation. The Equipment may incorporate copyright protection technology that is protected by U. Use of such copyright protection technology must be authorized by DISH Network or its suppliers or licensors, and is intended for home and other limited pay-per-view uses only, unless otherwise authorized by DISH Network or its suppliers or licensors.
Under the Fair Credit Reporting Act, you have the right to notify DISH Network if you believe we have reported inaccurate information about your account to any credit reporting agency.
DISH may change these Fees, increase or decrease these Fees, or impose additional Fees at any time upon notice to you. Page unless you are receiving Services pursuant to a Pre-Pay Promotion.
Contact the FCC see following or your library for the complete text of the regulations. Page Index
0コメント